Spdif sync with Presonus Firestudio project

There are a few things to watch out for if you have a late model Mac. This will not work with PCI cards. Most of us would probably not need a Mac PCIe interface. These are for large multi track systems with digital mixers. The Home studio enthusiast has many other options and they are mainly firewire options. That is what we’ll mainly focus on here. Click the pic to enlarge. Note that newer Macbooks do not have firewire. At the bottom of the page you’ll find lots of polls, user reviews and discussions from our forums. Keep in mind there are more audio interfaces that will work with your Mac.

Presonus FireStudio Project

Launch Ableton Live 2. Go to Options Preferences Audio 3. Go to Input Config:

Nov 03,  · kb has got it-check the presonus site and spec that would be the best way to do it in an affordable could also do it with a mixer and a single Firestudio, depending on .

To reduce the risk of electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing liquids and no object filled with liquids, such as vases, shall be placed on the apparatus. These service instructions are for use by qualified service personnel only. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Tutorials Multiple Mixers Recording Overview 2. Pre-Insert Balanced Direct Outputs. Multiple Mixers 2 Amp Fuse. MIDI data does not contain audio signals. To hear your sound module, you must connect the audio output of the sound module to a FireStudio Project audio input, then connect the FireStudio Project’s audio outputs to a sound system. You also can listen on headphones, using the FireStudio Project’s headphone output.

When you are ready to mix your Song, you must convert the recorded MIDI data to an audio waveform by recording a new audio track. Recording What is dynamic range? Why do you need noise gates? Tutorials Technical Information Why do we need compression?

Central Music / FIRESTUDIO

Audio Interfaces Finder We’ve been making recording interfaces for a long time. Learn Answers Ask and answer questions with PreSonus users just like you! Videos Seeing is believing—and in many cases, understanding. Blog Check out stories about tours by PreSonus artists, love letters and videos from customers, and more.

Get speed, versatility, and flexibility with the PreSonus Firestudio Project recording interface. 8 dual-purpose channel inputs are available with this digital rack-mount interface, as well as MIDI In/Out and 2 FireWire ports. 48V phantom power, daisy-chain capabilities, and zero-latency monitoring are just a few of the extra accoutrements that make the PreSonus Firestudio Project a great.

Excellent Condition, never gigged out. Everything works as it should. With its incredible signal-processing power on every channel, easy store and recall of every setting, and the ability to record it all with just two mouse clicks, you’ll get spoiled fast! Easier to use, better sounding, and flawlessly integrated with state-of-the-art software, it delivers the most creative environment possible for both live performance and studio music production.

But StudioLive is not simply a mixer, it’s a rapidly growing family of state-of-the-art, integrated hardware-software mixing and recording systems that deliver the features you need for live sound, live recording, and studio recording. It’s the perfect hardware core for a project studio. Or daisy-chain two StudioLive Yet despite its many controls and features, it’s compact, rack-mountable 14U , and easy to transport.

Build live mixes that glisten with clarity and detail–then record and enhance the performance with the power of StudioLive Get creative in the studio. Build mixes, loops, sound effects, and more, then bring them out to your show and mix them with the live performance. Process channels using your favorite plug-ins and completely automate your entire performance.

Echo ExpressCard/34 Thunderbolt Adapter & SxS Media Reader

MAudio Audiophile M Audio’s Audiophile card is the latest addition to its highly successful Delta family of soundcards. That saves a few bucks. Great way to start!

PreSonus FireStudio Project (Legacy) Universal Control / Driver / It is highly recommended to always use the most recent driver version available. Try to set a system restore point before installing a device driver.

Based on the award-winning Firepod, the FireStudio combines superior analog circuit design with new advanced platform technology to deliver enhanced performance for music recording and creation. The FireStudio is bundled with PreSonus Studio One Artist, our groundbreaking music creation program, and over 4 GB of virtual instruments, plug-ins, loops, and samples to get you started making music immediately. Many other companies offering recording interfaces add the cheapest possible microphone preamplifier as an afterthought to the interface.

PreSonus knows that the preamplifier is a key component in the sonic quality of a recording. The job of a microphone preamplifier is to boost microphone level signals to line level so that the signal can be converted from analog to digital. This mic to line boost is generally a preamplification of over times the voltage of the original mic level signal. This preamplification stage is one of the most important stages that the signal will go through before converted to digital, and is why a high performance preamplifier is important to achieving great results.

A cheap “off the shelf op-amp” type mic preamp that is found in most interfaces translates into thin, noisy and harsh results. All XMAX preamplifiers are built with the same three elements:

PreSonus FIRESTUDIO project

If you need extra digital mixer channels, the DixiMax FS provides a cost-effective, robust solution. Pros So many ins! Cons No computer connection options. Project studio builders will typically kit themselves out with enough audio ins and outs to cater for their own needs. Then friends get wind of the rig and, sniffing a money-saving opportunity, attempt to blag some free recording for their bands.

A drum kit will occupy four at the very least, then there’s the bass, guitar, vocal mic and whatever else.

Buy PreSonus Replacement MIDI & S/PDIF Breakout Cable for the FireBox featuring Adds MIDI & S/PDIF I/O to the FireBox, Transmits Bit 96 kHz Digital Audio. Review PreSonusPrice: $

So, I recently got a new audio interface…and I was looking for a new preamp to power my dynamic mic. The Studio Channel was one of many that I was looking at, then I got shipping notification from AMS that they were sending me this next for review. This is a channel strip style mic pre, has a built in compressor, eq, and even has a tube in it for that overdriven tube sound. Unlike other Presonus audio interfaces like the Presonus FireStudio or the Presonus AudioBox , this will not connect directly to your computer, you run it into the inputs of your interface or whatever you use to get your audio into your computer.

You could also run it live on stage into a mixer like the Presonus StudioLive or whatever you have as part of your setup. The bottom line is, this device gives you the tools to sculpt your audio input to your liking. I love the fact that it has a built in compressor and eq so I can tweak the sound to my own environment or for whatever feel I want at the time.

For example different mics, a bass, a guitar, or synth, will all sound different through the circuitry.

Exceptionnel!

An old new way of working… I promised a more thorough update — well, here it is. In my previous post about workflow, the studio, art etc. I happened upon the solution totally by chance.

I’m noticing that this blog is kinda turning into a PreSonus hate blog with the past few posts. Whoops. Continuing with that, the other day I woke up to a text that the PreSonus in the radio studio is dead and it put me in such an amazing mood for the rest of the day.

Accessories The Little Interface That Can The story The Little Engine That Could tells of a small locomotive that was able to pull a long train over a mountain because it was willing to work hard and thought it could succeed. Successful bands are a lot like that. So is the FireStudioT Mobile. This little audio-recording machine is ready, willing, and able to work hard and travel anywhere. If you need more than ten inputs for certain gigs, you can daisy-chain the FireStudio Mobile with a second FireStudio Mobile, or with any interface in the FireStudio family, for up to 52 inputs and outputs.

The FireStudio Mobile may be small, but it uses top-of-the-line components, including XMAX preamps and high-definition, bit, 96 kHz digital converters, with dB of dynamic range. And with PreSonus’ lauded JetPLL jitter-elimination technology, you get the tightest, most reliable digital sync in the industry.

Using a mixer with Firestudio Project

Excellent product in its functionality and especially for its price range a very good sound quality. For details all is said below but one thing bothers me that I would point out: Other than that all is well 1 people found this review helpful Did you find this review helpful? Finally, after much adjustment, it works correctly. Moreover, I do not have time to read manuals.

Feb 12,  · stickulari wrote:Hey Joey, you can set up your DAW as a mixer before you start if you want.I would say take the signals dry and play with them later, when you’re not concentrating on the performance. You could set your mixer up so that it receives analogue output from the interface as an input and listen to the mixer for monitoring.

Tweet There’s no doubt that computer software has blurred the lines between writing music and producing it. We use sounds to inspire parts, build backing tracks before we create melodies, and cull upon a myriad of eff ects to give our songs a “sound”—often long before they’re completed. But what happens to that sound when you showcase the song live?

You have a few options. You could sing and play along to a static backing track though many people feel that’s like doing Karaoke. You could rearrange the song and use whatever live instruments you have available to get close to the original.

How to daisy-chain Presonus Firestudio Project Interfaces